Mold Testing

Mold Testing in Southeast Michigan and Northwest Ohio

Certified mold inspectors, independent laboratory analysis, and a detailed report you can hand to your doctor, your agent, or your contractor.

Certified Mold Inspectors
Independent Labs
Detailed Written Report
What It Is

Real numbers instead of guesswork

Mold testing puts data behind what an inspection finds. We collect samples from the air, from surfaces, or from settled dust, send them to an independent laboratory, and come back with a report that names the mold families present and the levels they are at.

That matters because mold is not all the same. Some species are common and expected indoors. Others are the ones physicians ask about when a patient is not getting better. A test tells you which ones are in your building and how much of each.

Testing also gives you a baseline. When we compare a sample taken before the work to one taken after, you can see for yourself what changed rather than taking our word for it.

Types of Testing

The tests we run

Different questions call for different samples. We match the test to what you are trying to find out.

Mold Biotoxin and Fungal Count

A medical grade swab collects samples from surfaces to detect toxic mycotoxins produced by mold. Results identify five mycotoxins and give a fungal spore count with the mold families present.

Real-Time Labs

ERMI Testing

The Environmental Relative Moldiness Index analyzes settled dust with mold specific PCR. You get an index score that compares your building to national data.

Mycometrics or EnviroBiomics

HERTSMI Testing

Focuses on five molds known to be particularly harmful to people, including Stachybotrys Chartarum and Chaetomium Globosum. A HERTSMI score can also be derived from ERMI results.

Mycometrics or EnviroBiomics

Wall Cavity Testing

When mold is suspected behind a wall, we drill a small hole and draw air through an adapter into a testing medium over five minutes to find out what is growing where you cannot see.

IMS Labs, Commerce Twp, MI

Lift Tape Sampling

For mold you can see, a biological tape lifts a sample directly off the surface. The lab identifies the species present and how much of the surface is covered.

IMS Labs

Mold Spore Air Testing

We draw 15 liters of air through a cassette over five minutes. The lab examines it under a microscope and reports the mold families present and spore concentrations per cubic meter.

IMS Labs

Not sure which test fits your situation? Call us and we will talk it through before anything is scheduled.

Our Air Testing Process

How an air test works

As Certified Mold Inspectors, we compare the air inside your building to the air outside it.

Sample Indoors

We collect air samples from the areas of concern throughout the building.

Sample Outdoors

We take an outdoor sample as the baseline for what is normal in your area that day.

Independent Lab

Samples go to a certified outside lab, so the results are not ours to influence.

Detailed Report

You receive a roughly 20 page report on the mold types and spore levels found.

We Explain It

We walk you through what the numbers mean and what they suggest doing next.

When Testing Helps

Reasons people ask us to test

Testing answers questions that looking alone cannot.

You suspect mold but cannot see any
A physician is treating symptoms and asked for documentation
You are buying or selling and want the building documented
You want the work documented before and after remediation
You need to know which species and levels are present
An insurance claim or a dispute needs supporting records
Why MoldPro

Testing you can rely on

Independent Labs

Samples are analyzed by certified outside laboratories, not by us. The results are unbiased.

Certified Inspectors

Sampling is done by Certified Mold Inspectors who know where and how to collect a sample that means something.

We Explain the Report

A lab report is dense. We go through it with you so you understand what it actually says.

Chemical-Free Remediation

If the results call for remediation, we remove mold without harsh chemicals from start to finish.

Independent Lab Analysis

We do not grade our own work

Every sample we collect is sent to a certified independent laboratory. We do not analyze our own samples, and we do not decide what the numbers say.

That is deliberate. When a mold company tests, remediates, and then tests again using its own results, you have no way to verify anything. Using outside labs means the before and after numbers on your report came from somewhere with no stake in the outcome.

Call 734-439-8800
Email a Question
Serving Southeast Michigan and Northwest Ohio
Inspection, Testing, Remediation

Where testing fits in

These three services work together. Here is how they differ.


Mold Inspection

Finds the mold and the moisture source, and gives you a written report and a plan.

Learn more


You are here

Mold Testing

Independent lab analysis that names the species and levels, and documents conditions before and after.


Mold Remediation

Chemical-free removal of the mold and its root, with proper containment.

Learn more

Recent Testing

Testing work across our service area

Real jobs our crew has completed for homes and businesses near you.

TestingCommercial
Toledo, OH

TestingInspection
Ann Arbor, MI

TestingResidential
Monroe, MI

TestingBasement
Plymouth, MI

TestingCrawlspace
Brighton, MI

TestingAttic
Dundee, MI
What Clients Say

Trusted by our neighbors

★★★★★

I used a mold kit to test before and after their work. Before, we had 2 to 6 colonies throughout the house. Now I have 0 to 2. The proof is in the pudding.

Margaret-Mary SauppeGoogle review
★★★★★

They recommended I get tested for CIRS and they were right. My doctors had been running tests on me since August with no answers. If it was not for them I would still be getting test after test.

Haleigh SmithGoogle review
★★★★★

They came out without delay to do an inspection. They found no evidence of mold, but did help us realize our air vents were very dusty inside and that could have been the issue.

Olivia CarpusGoogle review
Testing Questions

Common questions

Which mold test do I need?

It depends on what you are trying to answer. Air testing is the usual starting point when you suspect a problem but cannot see it. Lift tape is for mold you can see. ERMI and HERTSMI are dust based and often requested when health concerns are involved. Wall cavity testing is for suspected growth behind a wall. Tell us what is going on and we will recommend the test that fits.

How long do results take?

Turnaround depends on the laboratory and the test. Air and tape samples are typically the fastest, while dust based tests like ERMI take longer because of the PCR analysis involved. We will give you a timeframe when the test is scheduled.

Can my doctor use these results?

Yes. Our reports name the mold families and levels found, which is the information physicians and health professionals ask for when they are connecting symptoms to a building. We work with a number of patients who came to us on a doctor’s recommendation.

Do you test after remediation?

Yes, and we recommend it. Post remediation testing compares the air in the finished space to the outdoor air, so you have documentation that the work returned the building to a normal condition rather than just our assurance that it did.

Is testing part of an inspection, or separate?

They are separate services that work well together. An inspection finds the mold and the moisture source behind it. Testing adds laboratory data about which species are present and at what levels. During your inspection we will tell you which tests would give you useful information for your building.

Find out what is really in your air

Schedule mold testing today. A real person is ready to talk through your situation and recommend the right test.