Mold Testing in Southeast Michigan and Northwest Ohio
Certified mold inspectors, independent laboratory analysis, and a detailed report you can hand to your doctor, your agent, or your contractor.
Independent Labs
Detailed Written Report
Real numbers instead of guesswork
Mold testing puts data behind what an inspection finds. We collect samples from the air, from surfaces, or from settled dust, send them to an independent laboratory, and come back with a report that names the mold families present and the levels they are at.
That matters because mold is not all the same. Some species are common and expected indoors. Others are the ones physicians ask about when a patient is not getting better. A test tells you which ones are in your building and how much of each.
Testing also gives you a baseline. When we compare a sample taken before the work to one taken after, you can see for yourself what changed rather than taking our word for it.
The tests we run
Different questions call for different samples. We match the test to what you are trying to find out.
Mold Biotoxin and Fungal Count
A medical grade swab collects samples from surfaces to detect toxic mycotoxins produced by mold. Results identify five mycotoxins and give a fungal spore count with the mold families present.
Real-Time Labs
ERMI Testing
The Environmental Relative Moldiness Index analyzes settled dust with mold specific PCR. You get an index score that compares your building to national data.
Mycometrics or EnviroBiomics
HERTSMI Testing
Focuses on five molds known to be particularly harmful to people, including Stachybotrys Chartarum and Chaetomium Globosum. A HERTSMI score can also be derived from ERMI results.
Mycometrics or EnviroBiomics
Wall Cavity Testing
When mold is suspected behind a wall, we drill a small hole and draw air through an adapter into a testing medium over five minutes to find out what is growing where you cannot see.
IMS Labs, Commerce Twp, MI
Lift Tape Sampling
For mold you can see, a biological tape lifts a sample directly off the surface. The lab identifies the species present and how much of the surface is covered.
IMS Labs
Mold Spore Air Testing
We draw 15 liters of air through a cassette over five minutes. The lab examines it under a microscope and reports the mold families present and spore concentrations per cubic meter.
IMS Labs
Not sure which test fits your situation? Call us and we will talk it through before anything is scheduled.
How an air test works
As Certified Mold Inspectors, we compare the air inside your building to the air outside it.
Sample Indoors
We collect air samples from the areas of concern throughout the building.
Sample Outdoors
We take an outdoor sample as the baseline for what is normal in your area that day.
Independent Lab
Samples go to a certified outside lab, so the results are not ours to influence.
Detailed Report
You receive a roughly 20 page report on the mold types and spore levels found.
We Explain It
We walk you through what the numbers mean and what they suggest doing next.
Reasons people ask us to test
Testing answers questions that looking alone cannot.
Testing you can rely on
Independent Labs
Samples are analyzed by certified outside laboratories, not by us. The results are unbiased.
Certified Inspectors
Sampling is done by Certified Mold Inspectors who know where and how to collect a sample that means something.
We Explain the Report
A lab report is dense. We go through it with you so you understand what it actually says.
Chemical-Free Remediation
If the results call for remediation, we remove mold without harsh chemicals from start to finish.
We do not grade our own work
Every sample we collect is sent to a certified independent laboratory. We do not analyze our own samples, and we do not decide what the numbers say.
That is deliberate. When a mold company tests, remediates, and then tests again using its own results, you have no way to verify anything. Using outside labs means the before and after numbers on your report came from somewhere with no stake in the outcome.
Where testing fits in
These three services work together. Here is how they differ.
Testing work across our service area
Real jobs our crew has completed for homes and businesses near you.
Trusted by our neighbors
I used a mold kit to test before and after their work. Before, we had 2 to 6 colonies throughout the house. Now I have 0 to 2. The proof is in the pudding.
They recommended I get tested for CIRS and they were right. My doctors had been running tests on me since August with no answers. If it was not for them I would still be getting test after test.
They came out without delay to do an inspection. They found no evidence of mold, but did help us realize our air vents were very dusty inside and that could have been the issue.
Common questions
Which mold test do I need?
It depends on what you are trying to answer. Air testing is the usual starting point when you suspect a problem but cannot see it. Lift tape is for mold you can see. ERMI and HERTSMI are dust based and often requested when health concerns are involved. Wall cavity testing is for suspected growth behind a wall. Tell us what is going on and we will recommend the test that fits.
How long do results take?
Turnaround depends on the laboratory and the test. Air and tape samples are typically the fastest, while dust based tests like ERMI take longer because of the PCR analysis involved. We will give you a timeframe when the test is scheduled.
Can my doctor use these results?
Yes. Our reports name the mold families and levels found, which is the information physicians and health professionals ask for when they are connecting symptoms to a building. We work with a number of patients who came to us on a doctor’s recommendation.
Do you test after remediation?
Yes, and we recommend it. Post remediation testing compares the air in the finished space to the outdoor air, so you have documentation that the work returned the building to a normal condition rather than just our assurance that it did.
Is testing part of an inspection, or separate?
They are separate services that work well together. An inspection finds the mold and the moisture source behind it. Testing adds laboratory data about which species are present and at what levels. During your inspection we will tell you which tests would give you useful information for your building.
Find out what is really in your air
Schedule mold testing today. A real person is ready to talk through your situation and recommend the right test.